The 855 SOFC Test system is an integrated, turn-key Solid Oxide Fuel Cell Test System. This unit has a zero volt capability for lower measurement range. The 855 SOFC system is known for it’s high performance and accuracy.
FuelCell® Software and Experimental Methods Manual are included. Optional Impedance Spectroscopy & HFR.
| Products | Description |
|---|---|
| 881 FRA | Integrated FRA for High Frequency Resistance (HFR) and Electrochemical Impedance Spectroscopy (EIS) measurement from 1 mHz to 10 kHz |
| Automatic Water Fill | |
| Manual and Auto MultiGas Modules | Multiple reactant gas selector |
| Reformate Simulation | |
| DI Water Tank | Simple solution for pressurized delivery for existing DI/RO water source |
| Probostat Test Fixture and Furnace | Probostat Test Fixture and Furnace with redundant over-temp control |
| Specification: | Details |
|---|---|
| Electronic Load: | |
| Maximum Load Current: | 5/25/50 A |
| Maximum Load Power: | 100 W |
| Minimum Load Resistance: | < 2 mΩ (100 mV @ 50 A at load terminals) |
| Current Resolution: | 1 mA for 5/25/50 A |
| Current Accuracy: | 0.3 % of full scale current rating |
| Voltage Measurement and Data Acquisition: | |
| Maximum Whole Cell Voltage: | 20 V |
| Maximum Reference Electrode Voltage: | 9.999 V |
| Sense Lead Input Resistance: | > 35 kΩ |
| Voltage Resolution: | I mV |
| Voltage Accuracy: | ±3 mV ±0.3 % of reading |
| Voltage and Current Data Update Rate: | 100 Hz |
| Reactant Gas Control System: | |
| All 316 stainless steel construction of humidifiers, flow path, valves and mass flow controllers, with Swagelok® fittings | |
| Mass Flow Control: | Anode up to 1 SLPM and cathode up to 3 SLPM*. Software controlled mass flow controllers. Automatic N2 purge valves on anode and cathode |
| Alarm Inputs: | Gas supply pressures (3), humidifier water level (1), furnace over temperature (1), and external (1) |
| Temperature Controllers: | |
| Quantity: | (3) Furnace, anode humidifier, cell temp |
| Set and Report Accuracy: | ±0.25 % of span, ±1 least significant digit |
| Sensor Type: | Thermocouple, type K (R/S also available) |
| Temperature Limit Controller: | (1) Furnace over-temp |
| Humidifier: | Anode only, sparger-type, single passivated 316L W heaters per bottle |
| Temperature Range: | Ambient to 99 ° C |
| Automated humidifier bypass | |
| Environment: | |
| Operating Temperature: | 0 - 40 °C |
| Power Source: | 120 V, 50/60 Hz, 900 W |
| Enclosure Type: | Single bench top enclosure |
| Size and Weight: | 18” H x 11” W x 19” D, 50 lb |
| 46 cm x 28 cm x 48 cm, 23 kg | |
| Safety Features: | Automatic shutdown and N2, purge with under voltage, over-current, over-temperature, loss of reactant or purge gas pressure, furnace over-temperature limit, communications failure or external alarm. manual emergency stop switch included for manual shutdown by operator. |
| Products | Description |
|---|---|
| 881 FRA | Integrated FRA for High Frequency Resistance (HFR) and Electrochemical Impedance Spectroscopy (EIS) measurement from 1 mHz to 10 kHz |
| Automatic Water Fill | |
| Manual and Auto MultiGas Modules | Multiple reactant gas selector |
| Reformate Simulation | |
| DI Water Tank | Simple solution for pressurized delivery for existing DI/RO water source |
| Probostat Test Fixture and Furnace | Probostat Test Fixture and Furnace with redundant over-temp control |
| Specification: | Details |
|---|---|
| Electronic Load: | |
| Maximum Load Current: | 5/25/50 A |
| Maximum Load Power: | 100 W |
| Minimum Load Resistance: | < 2 mΩ (100 mV @ 50 A at load terminals) |
| Current Resolution: | 1 mA for 5/25/50 A |
| Current Accuracy: | 0.3 % of full scale current rating |
| Voltage Measurement and Data Acquisition: | |
| Maximum Whole Cell Voltage: | 20 V |
| Maximum Reference Electrode Voltage: | 9.999 V |
| Sense Lead Input Resistance: | > 35 kΩ |
| Voltage Resolution: | I mV |
| Voltage Accuracy: | ±3 mV ±0.3 % of reading |
| Voltage and Current Data Update Rate: | 100 Hz |
| Reactant Gas Control System: | |
| All 316 stainless steel construction of humidifiers, flow path, valves and mass flow controllers, with Swagelok® fittings | |
| Mass Flow Control: | Anode up to 1 SLPM and cathode up to 3 SLPM*. Software controlled mass flow controllers. Automatic N2 purge valves on anode and cathode |
| Alarm Inputs: | Gas supply pressures (3), humidifier water level (1), furnace over temperature (1), and external (1) |
| Temperature Controllers: | |
| Quantity: | (3) Furnace, anode humidifier, cell temp |
| Set and Report Accuracy: | ±0.25 % of span, ±1 least significant digit |
| Sensor Type: | Thermocouple, type K (R/S also available) |
| Temperature Limit Controller: | (1) Furnace over-temp |
| Humidifier: | Anode only, sparger-type, single passivated 316L W heaters per bottle |
| Temperature Range: | Ambient to 99 ° C |
| Automated humidifier bypass | |
| Environment: | |
| Operating Temperature: | 0 - 40 °C |
| Power Source: | 120 V, 50/60 Hz, 900 W |
| Enclosure Type: | Single bench top enclosure |
| Size and Weight: | 18” H x 11” W x 19” D, 50 lb |
| 46 cm x 28 cm x 48 cm, 23 kg | |
| Safety Features: | Automatic shutdown and N2, purge with under voltage, over-current, over-temperature, loss of reactant or purge gas pressure, furnace over-temperature limit, communications failure or external alarm. manual emergency stop switch included for manual shutdown by operator. |
